Q20 Wireless Controller Smart Underfloor Heating Zone Control
The central control unit for a smart underfloor heating system. The Q20 Controller independently manages up to 8 heating zones and communicates wirelessly with Q20 and Q30 room thermostats.
RF communication with Q20 and Q30 room thermostats.
Independent room-by-room temperature control.
Suitable for manifolds with multiple heating circuits.
Smart Life connectivity through the optional e-Hub.
One controller. Complete room-by-room control.
The Q20 Controller receives wireless heating requests from the thermostats installed in each room and coordinates the complete underfloor heating system.
When a room requires heat, the controller powers the thermal actuators assigned to that zone and sends a heating demand to the boiler or compatible heat source.
Each room can operate independently, helping avoid unnecessary heating in areas that have already reached their set temperature.
Up to eight room thermostats can control individual heating zones.
Supports installations with multiple manifold circuits.
Compatible with Normally Open and Normally Closed actuators.
Delay setting for pump and heat-source activation.
Wireless room control for underfloor heating
Designed for flexible installation, individual room control and modern multi-zone heating systems.
Wireless room thermostats
Q20 and Q30 thermostats communicate with the controller without control wiring between each room and the manifold.
Wired or wireless boiler control
Use the conventional wired output or the optional Q20 RF Receiver when a control cable is not available.
Individual zone control
Each thermostat controls its own room and the actuators assigned to that zone.
NO / NC actuators
The controller can operate both Normally Open and Normally Closed actuator configurations.
Adjustable delay
Pump and boiler activation delay can be adjusted between 0 and 6 minutes.
Heating / Cooling
Suitable for compatible systems where heating and cooling modes are required.
How the Q20 Wireless system works
The components work together to provide complete room-by-room control for hydronic underfloor heating.
Q20 Thermostat
Measures room temperature and sends the heating demand wirelessly.
Q20 thermostat →Q30 Thermostat
Premium E-Ink thermostat with rechargeable Li-Ion battery and USB-C.
Q30 thermostat →Q20 Controller
Receives room requests and controls the thermal actuators on the manifold.
Q20 Controller →Q20 RF Receiver
Transfers heating demand wirelessly to the boiler or compatible heat source.
RF Receiver →e-Hub Q20
Adds Smart Life connectivity and remote heating control.
e-Hub →Thermal Actuator
Opens and closes the heating circuits assigned to each zone.
Thermal actuator →Technical specifications
Key specifications and system characteristics for planning a compatible Quicksmart installation.
Build a complete Q20 Wireless heating control system
Combine the Q20 Controller with Q20 or Q30 thermostats, thermal actuators, e-Hub and the optional RF Receiver according to your installation.