Q10 Wired Controller Complete Multi-Zone Underfloor Heating Control
Central wired controller for room-by-room underfloor heating control. The Q10 Controller receives wired thermostat signals and manages thermal actuators, circulation pump and boiler demand.
Independent temperature control for up to eight rooms or heating zones.
Compatible with Normally Closed or Normally Open electrothermal actuators.
Integrated circulation-pump output based on actual heating demand.
Integrated heat-source demand with adjustable delay.
One wired controller. Every heating zone coordinated.
The Q10 Controller is installed near the underfloor heating manifold and centralises the signals received from wired room thermostats.
When a room requires heat, Q10 powers the actuator or actuators assigned to that zone. At the same time it can manage the circulation pump and boiler demand.
Each room can therefore operate independently, without heating the entire property when only one zone requires energy.
Up to eight wired room thermostats can control separate zones.
Supports compatible 230 V Normally Closed or Normally Open actuators.
Delay can be configured for pump and boiler operation.
Designed for integration into a permanent wired heating-control installation.
More than an actuator wiring centre
Q10 coordinates thermostats, manifold actuators, circulation pump and boiler demand in one wired multi-zone system.
Eight heating zones
Each zone can be controlled independently by its own wired room thermostat.
NC / NO actuators
Select the actuator type used by the manifold installation.
Circulation-pump control
The pump can operate only when one or more zones require heat.
Boiler demand
The controller sends a start request to the boiler or compatible heat source.
Adjustable delay
Helps synchronise actuator opening with pump and heat-source operation.
Heating / Cooling
Can be integrated into compatible heating or cooling system configurations.
How the Q10 wired system works
All room-control signals are transmitted by cable for a stable and predictable multi-zone heating system.
Q40 / Q50 Thermostat
Measures room temperature and sends a wired heating request.
Q40 thermostat →Q10 Controller
Receives the request and activates the corresponding zone outputs.
Q10 Controller →Thermal Actuators
Open only the manifold circuits assigned to the room.
Thermal actuator →Circulation Pump
Runs when the system has real heating demand.
Boiler / Heat Source
Receives the central heating demand from Q10.
Q50 Thermostat
Premium colour-touchscreen option for the same Q10 ecosystem.
Q50 thermostat →Technical specifications
Key specifications and system characteristics for planning a compatible Quicksmart installation.
Build a complete Q10 wired heating control system
Combine the Q10 Controller with wired thermostats and thermal actuators for stable room-by-room underfloor heating control.