Description
This Quicksmart Q20 configuration is designed for larger homes with several rooms and temperature zones that need independent control. 2 Q20 Controllers can organise the installation across two floors or two manifolds, while 6 Q20 thermostats provide separate temperature control in the main heating zones. It is suitable for spaces used differently throughout the day. Each thermostat can request heat independently, while the Q20 Controller activates only the required manifold circuits. Q20 thermostats communicate wirelessly with the Q20 Controller and can be positioned on a wall or furniture using the supplied stands. Temperature control and scheduling are also available through Smart Life. In the complete configuration, 20 NC thermal actuators control the underfloor heating circuits. One temperature zone can operate one or several manifold loops, depending on the installation design.
The Q20 platform can be used for underfloor heating,
manifold-based radiator systems or mixed underfloor-heating and radiator installations.
It is suitable for new projects and for upgrading finished homes where thermostat wiring
has not been prepared. The configuration is generated automatically from the selected product. Each zone requests heat independently and the system activates only the required circuits. The Q20 thermostat monitors the room and sends heat demand wirelessly. The controller identifies the zone and activates the outputs assigned to its heating circuits. Actuators on the manifold allow water flow only through the circuits requesting heat. The Q20 RF Receiver can send the wireless ON/OFF demand to the boiler.
The Q20 Controller is the control centre of the wireless system. It coordinates heat distribution
according to demand received from the room thermostats.
It can manage up to 8 thermostats and up to 32 thermal actuators. One thermostat can operate several
manifold circuits, allowing the installation to be configured according to the real number of zones
and heating loops.
The controller can operate the circulation pump and boiler, supports NC or NO actuators and allows
a 0–6 minute start delay for the boiler and pump.
The Q20 wireless thermostat has a large negative LCD display with touch controls and communicates
with the Q20 Controller at 868 MHz without thermostat wiring between room and manifold.
It can be powered by 2 AA batteries or USB 5 V / 1 A and can be positioned on the wall or on
furniture using the supplied stands. Boiler demand and remote app access are integrated into the same Q20 ecosystem.
The receiver communicates wirelessly with the Q20 Controller and sends ON/OFF demand to the boiler.
It operates at 868 MHz and is useful where there is no control cable between the manifold and boiler.
e-Hub connects the Q20 ecosystem to the internet and enables individual zone control and schedules
through the Smart Life / Tuya app.
Thermal actuators are fitted to the manifold and automatically open or close the heating circuits.
When a thermostat requests heat, the Q20 Controller powers the actuator assigned to that zone.
The complete version of this product includes 20 NC actuators.
One temperature zone can control one or several manifold circuits, so actuator count is not the same as room count. Practical product presentations for the Q20 ecosystem. Overview of the Q20 Wireless platform and how the main components work together. Q20 thermostat presentation with touch controls and Smart Life integration. Visual technical information for the main components and system connections. Essential steps for pairing Q20/Q30 thermostats, the Q20 RF Receiver and e-Hub.
Power the controller, select channel 1–8 using the arrow buttons and press SET
until the selected zone LED flashes rapidly.
With the thermostat switched off, press and hold M until the code appears,
then press the up button. Wait until the controller LED stops flashing.
Select channel 1–8 on the Controller and press SET for rapid flashing.
With Q30 switched on, press and hold O and up for about 5 seconds,
then press up again to connect.
Press and hold Pairing on the receiver until LED 2 flashes rapidly.
On the Controller, move to the slowly flashing receiver indicator and press SET.
Download Smart Life from Google Play or the App Store. Put e-Hub into Wi-Fi pairing mode
using the Reset button, then add it as a device in Smart Life. Browse complete wireless heating control kits or compare Q20 and Q30 thermostats.
Choose the correct manual for your Quicksmart Q20 Wireless
or Q10 Wired system and download the PDF installation and configuration guide.
Wireless Thermostats – Smart WiFi
Wired Thermostats – Smart WiFiWireless underfloor heating control for large two-storey homes with 6 independent zones
What is included in this Q20 underfloor heating control kit?
How Q20 wireless underfloor heating control works
The thermostat measures room temperature
The Q20 Controller receives the demand
Thermal actuators open the circuits
The boiler starts automatically
Q20 Controller for wireless underfloor heating zone control
Q20 Controller technical data
Q20 wireless thermostat with touch controls and Smart Life access
Q20 thermostat technical data
Q20 RF Receiver and e-Hub smart gateway
Q20 RF Receiver
e-Hub Gateway
NC thermal actuators for underfloor heating manifolds
Quicksmart NC actuator technical data
Q20 Wireless system and Q20 thermostat videos
Quicksmart Q20 system
Q20 Wireless Thermostat
Q20 system diagrams
Quick pairing guide for the Q20 system
Pairing the Q20 thermostat with the Q20 Controller
Pairing the Q30 thermostat with the Q20 Controller
Pairing the Q20 RF Receiver with the Controller
Smart Life and e-Hub setup
Continue with the Q20 Wireless system
Wireless / Wired Heating Control Installation Manuals
Q20 Wireless Heating Control
Q10 Wired Heating Control
Bicu Bianca Catalina –
Spre deosebire de alte locuri unde am sunat și am dat peste oameni care vând produse fără să le cunoască cu adevărat, la Quicksmart experiența a fost complet diferită.
Am primit consultanță reală înainte de achiziție, explicații clare pe partea tehnică și răspunsuri concrete la toate întrebările mele. Nu doar că știu ce vând, dar chiar te ajută să alegi soluția potrivită pentru proiectul tău.
Se vede diferența când discuți cu profesioniști. Recomand fără rezerve!
Mircea N. –
Un kit serios, de calitate, instalare rapida fara cabluri suplimentare si functioneaza perfect